Pulz HD5000 Platinum Power Amplifier

  • Product Code: ZP2200FT
  • Pulz HD5000 Platinum Power Amplifier

Our HD series of amplifiers are especially developed to cater to today’s needs where brute power is demanded but the dimensions need to be compact and the reliability needs to be very high.

HD5000 is a force ventilated two-channel amplifier that can be bridged to yield 5000 watts peak power. However, at four ohms the amp can deliver generous 2100 watts RMS per channel; that too with just 2U dimensions. With Handy attenuators in front, the amp can be easily safeguarded against the abuse. Selectable VPL (Voltage Peak Limiter) setting can further enhance the reliability of the amp.

Specifications
Frequency Response 6.8 Hz - 25 kHz
Signal To Noise Ratio >112 dBA
Input Impedance 12 kOhm
Slew rate 20 V/microsecond
Channel Separation >70 dB
Input Connectors 3-pin XLR, electronically balanced
Cooling Front-to-rear airflow, temperature controlled speed
Number of channels 2
Peak total output all channel driven 5000 W
Peak output voltage per channel 150 V
Max. output current per channel 38 A rms
16 ohms per ch. (all ch.' s driven) 660 W
4 ohms per ch. (all ch.' s driven) 2100 W
2 ohms per ch. (all ch.' s driven) 2500 W
8 ohms Bridged per ch. 4200 W
4 ohms Bridged per ch. 5000 W
2 ohms Bridged per ch. -
Performance with Gain 38 dB and VPL : 150 V
THD 20 Hz - 20 kHz for 1 W <0.1%
THD at 1 kHz and 1 dB below clippi <0.05%
Output impedance @ 100 Hz 56 mOhm
Voltage Peak Limiter mode (per ch. Soft
Default gain 38 dB
Level adjustment (per ch.) letented from -inf to 0 dB
Outout connectors (per ch.) Neutrik Speakon or Binding Posts
Output bridge mode per two ch.'s A+B - ch. A is signal input source. A
Common Power Average Limiter (PAL) 2); Power on
Per channel Signal present / High-impedance; -20 dB, -15 dB, -10 dB and -4 dB output,signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL),Very High Frequency (VHF); High temperature; Fault; Mute
Input Comman Mode Rejection, CM 54 dB
VPL , selectable per ch. (V) 150, 134, 113, 94, 84, 70, 60, 50 V
Construction & Characteristics
8 ohms per ch. (all ch.' s driven) 1300 W
16 ohms Bridged per ch. 2600 W
General
Operating voltage, 230 V/ 115 V nominal 180-255 V/95-125 V
Minimum power-up voltage, 230 V/ 115 V 180 V/95 V
Power Average Limiter (PAL) Yes
Soft start / Inrush Current Draw Yes / max. 5 A
Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensions & Packaging
Dimensions (H X W X D) W: 483 mm (19"), H: 88 mm (2 U), Overall D: 396 mm (15.6"), Mounting D: 358 mm (14.1")
Net Weight 8.5 Kg.
Shipping dimensions Separate 230 V or 115 V version available. Not selectable on the amplifier.